To raise or lower the receive volume
■
To raise the volume of the receive level of the headset or the handset,
■
press the right volume control button labeled
To lower the receive level of the headset or the handset,
■
press the left volume control button labeled
NOTE:
There are eight possible volume settings. Each press of the volume control
button raises or lowers the volume one incremental level.
As you raise or lower the headset volume level, the display reflects your choice,
such as:
Headset L >>>>>
On the display, one arrow is the lowest setting, and eight arrows is the highest
setting.
NOTE:
For procedures to raise and lower the ringer volume on your CALLMASTER
IV set, see the procedures for the Select Ring feature later in this section.
Disconnecting from Calls
You can disconnect from a call in several ways:
Press
■
than waiting for a caller or trunk to disconnect and enables you to perform
other ACD or voice terminal procedures sooner. You do not hear dial tone
after you press
Press
■
Drop
Use
place another call.
Feature Procedures
The procedures in this section give short, step-by-step instructions for using each
of these features. For your convenience, the features are listed alphabetically.
H
to disconnect from any type of call. This method is faster
Release
Release
.
Drop
which disconnects you from a call and gives you dial tone.
Test
when you want to disconnect from an ACD or non-ACD call and
Test
Basic Voice Terminal Operations
.
.
5
5
Issue 5 August 2005
21