Avaya Definity Callmaster IV User And Installation Instructions Manual page 25

To adjust the tone ringer volume if necessary
1. To raise the volume, press the right volume control button labeled
lower the volume, press the left volume control button labeled
■
Self-Test
To test the lights, the ringer, and the display on your voice terminal
1. While on-hook or off-hook, press
■
2. Press and hold down
■
■
■
3. Release
■
Transfer
To send an existing call to another extension or outside number
1. Press
■
■
■
2. Dial the number where the call will be transferred.
■
■
■
3. Press
■
Display shows the volume level:
Ringer L >>>>>
(There are eight possible volume settings. On the display, one arrow
indicates the lowest setting has been selected. Eight arrows
indicates the highest setting has been selected.)
Green light next to Select
Drop
.
Test
Three groups of lights go on in sequence.
Ringer sounds.
Display is activated.
Drop to end test.
Test
Ringer, display, and lights return to pretest state; the light next to
goes off.
Select
.
Transfer
Green light next to the call appearance flutters.
Present call is put on hold.
You are given a new call appearance, and you hear dial tone.
You hear ringback tone.
If the call is answered, remain on the line and announce the call if
desired. Continue to Step 3.
If the call is not answered or if the line is busy, return to the held call
by pressing the call appearance button where the green light is
fluttering. Disregard Step 3.
Transfer again.
Call is transferred to the dialed number.
Basic Voice Terminal Operations
H
Select .
goes on.
Issue 5 August 2005
; to
.
25