Avaya Definity Callmaster IV User And Installation Instructions Manual page 10

Voice terminal
Hide thumbs Also See for Definity Callmaster IV:
Table of Contents

Advertisement

Feature Descriptions
Starting at the top left of
Message Light—A red light which goes on steadily when a message has been
left for you.
Select Button—Can be used in two different ways:
Used with
Used with
available patterns.
Volume Control Buttons—For adjusting the volume of the headset (or handset).
These buttons adjust the volume of the tone ringer if the headset (or handset) is
unplugged or the CALLMASTER IV is ringing.
Drop/Test Button—For disconnecting from a call or dropping the last party added
to a conference call. When used with
voice terminal lights and tone ringer.
Conference/Ring Button—For setting up conference calls. With a DEFINITY
ECS or a DEFINITY Generic 1 or Generic 3, the conference can include up to six
parties. DEFINITY Generic 2 users can conference up to three parties. (To add
more parties, DEFINITY Generic 2 users should see their system manager.)
When used with
voice terminal.
Transfer Button—For transferring a call to another voice terminal.
Hold Button— A red button for putting calls on hold.
Display— A built-in LCD 2-line by 40-character display.
6 Call Appearance/Feature Buttons — These six buttons are devoted to
handling incoming and outgoing calls (call appearances) and are labeled with an
extension number. Each button has a red appearance light beside it to tell you that
this is the line you are using or that this is the line you will get when you answer a
call. The green status light next to each call appearance and feature button tells
you the line or feature is being used.
15 Feature Buttons—Each of these 15 buttons accesses a feature and is labeled
with a feature name. Each button has a green light beside it. When the green light
goes on, the feature is active.
Line Jack (on bottom of voice terminal)—The line jack is used for connecting a
line cord to your voice terminal.This jack is labeled "2 WIRE."
Release Button—Used in ACD operation to end a call. However, pressing
is equivalent to hanging up; you will not receive dial tone.
Release
10
Issue 5 August 2005
Figure 1
and continuing clockwise:
Drop
to initiate a self-test of your voice terminal;
Test
Conference
to select your own personalized ring from among eight
Ring
Select
, you can select a personalized ringing pattern for your
Select
, you can perform a self-test of your

Advertisement

Table of Contents
loading

Table of Contents