Avaya Definity Callmaster IV User And Installation Instructions Manual page 22

Basic Voice Terminal Operations
Conference
To add another party to an existing call
NOTE:
If your CALLMASTER IV voice terminal is connected to a DEFINITY ECS or
a DEFINITY Generic 1 or Generic 3, the conference call can include up to
six parties. If your CALLMASTER IV is connected to a DEFINITY Generic 2,
the conference can include up to three parties. (For a conference call of
more than three parties, contact your system manager.)
1. Press
■
■
2. Dial the number of the new party and wait for an answer.
■
■
3. Press
■
4. Repeat Steps 1 through 3 to add another party to the conference call.
■
5. Press
■
■
■
6. Press the call appearance button of the held call (first call).
7. Press
■
22
Issue 5 August 2005
Conference
.
Ring
Present call is put on hold; all other parties remain connected to
each other.
You are given a new call appearance and hear dial tone.
If the party answers, explain who is on the conference call and go on
to Step 3.
If the party does not answer or if the line is busy, press the call
appearance beside the fluttering light to return to the held call (skip
the next step).
Conference again.
Ring
All parties on the call are now connected.
To add a call you have put on hold to another call to which you are
connected
Conference
.
Ring
Green light at the held call appearance continues to flutter.
Green light at the current call appearance also flutters.
You are given a new call appearance and hear dial tone.
Conference again.
Ring
All parties on the call are now connected.