Avaya Definity Callmaster IV User And Installation Instructions Manual page 23

Drop
To disconnect from an active 2-party call
1. Press
■
NOTE:
You may press
However, if you press
To drop the last party you added to a conference call
1. Press
■
Hold
To put a call on hold while you answer another call, place a call, or perform some
other task
1. Press
■
NOTE:
If you put a conference call on hold, the other parties remain
connected.
2. Press
■
3. Press the call appearance of the incoming call.
■
4. Press the call appearance of the held call.
Mute
To prevent the other party from hearing you
1. Press
■
2. When you want to resume the conversation with the other person on the
call, press
■
NOTE:
The Mute feature has no effect when an adjunct is active. Use the Mute
feature on the adjunct equipment.
Drop
.
Test
You hear dial tone.
instead of
Release
Release
Drop
.
Test
The last party added to the conference call is dropped; you and the
other parties remain connected.
Hold
.
Green light next to the held call appearance flutters.
To answer a new call while active on another call
Hold
.
Green light next to the held call appearance flutters.
To return to the held call (dropping the new call)
Mute
.
Red light next to Mute
hear you.
Mute again.
Red light next to button goes off; the other person can hear you
again.
Basic Voice Terminal Operations
Drop
to disconnect faster.
Test
you will not hear dial tone.
goes on; the other person on the call cannot
Issue 5 August 2005
23