Installation Procedures - Avaya Definity Callmaster IV User And Installation Instructions Manual

Installation
Orderable Equipment (Continued)
Designation cards (set of 25) - U.S. English
Designation cards (set of 25) - U.S. English /
Southwestern Bell
Designation cards (set of 25) - Italian
Designation cards (set of 25) - Japanese
Designation cards (set of 25) - Canadian French
Designation cards (set of 25) - Dutch
Designation cards (set of 25) - Castilian Spanish / Latin
American Spanish
Designation cards (set of 25) - German
Designation cards (set of 25) - Parisian French / Belgian
French
Designation cards (set of 25) - Brazilian Portuguese
* This item comes with the Handset D-Kit, but it can also be ordered separately using
the Comcode in the second column.

Installation Procedures

Use the following procedures to install your CALLMASTER IV voice terminal.
See Figure 3
1. Lay the voice terminal face down so the bottom slopes toward you.
2. Plug the line cord into the line jack. Press firmly until you hear the line cord
click.
3. Press the line cord into the line cord routing channel, placing the cord
under the tab, and gently pull any slack from the cord to the rear of the
voice terminal.
4. Turn the voice terminal rightside up so that the display is facing you.
5. Plug the line cord into the modular wall jack. (Since the line cord is
7-feet/2.1336 meters long, your CALLMASTER voice terminal must be
within this distance from the wall jack.)
14
Issue 5 August 2005
for the location of the jacks mentioned below.
847933850
848055737
847945565
847933868
847933884
847933892
847933900
847933400
847933934
847933959
2
3 of 3