GE LOGIQ P6 Series Service Manual page 309

GE H
EALTHCARE
5394152, Revision 5
D
IRECTION
8-2-36 Probe Holder
8-2-36-1 Tools
• No need tool
8-2-36-2 Removal procedure
1.) Remove the probe holders from the Keyboard.
2.) Perform the following functional tests. If all are successful, include the debrief script provided below.
Table 8-37
Service Manual
Section 4-3-1
Section 4-3-2
Section 4-8-1
Section 10-5-5
8-2-36-3 Mounting Procedure
Install the new parts in the reverse order of removal.
Figure 8-124 Probe Holders
Functional Tests
Section Functional Test / Diagnostic Test
Cover Parts Function Validation
Power On/Boot Up
Power Off / Shutdown
Physical Inspection
Chapter 8 -
LOGIQ™ P6/P6 P S
RO ERVICE
Debrief Script
"Service Manual, Direction
5394152, Rev 1+, Section 8-2-36. Equipment
passed all required tests and is ready for use. "
M
ANUAL
Page 8-83