GE LOGIQ P6 Series Service Manual page 289

GE H
EALTHCARE
5394152, Revision 5
D
IRECTION
8-2-24 EMI Cover L and R
8-2-24-1 Tools
• Common Phillips screwdrivers
8-2-24-2 Preparations
• Shut down the system and switch off the main breaker.
8-2-24-3 Removal procedure
1.) Remove the Side Left Cover. Refer to the
2.) Unscrew the 6 screws on left EML cover and 9 screws on the right EMI cover.
3.) Perform the following functional tests. If all are successful, include the debrief script provided below.
Table 8-25
Service Manual
Section 4-3-1
Section 4-3-2
Section 4-8-1
Section 10-5-5
8-2-24-4 Mounting Procedure
Install the new parts in the reverse order of removal.
Figure 8-102 EMI Cover Land R
Functional Tests
Section Functional Test / Diagnostic Test
Cover Parts Function Validation
8-2-14 "Right or Left Side Cover" on page 8-48
Power On/Boot Up
Power Off / Shutdown
Physical Inspection
Chapter 8 -
LOGIQ™ P6/P6 P S
RO ERVICE
Debrief Script
"Service Manual, Direction
5394152, Rev 1+, Section 8-2-24. Equipment
passed all required tests and is ready for use. "
M
ANUAL
Page 8-63