Tracing A Malicious Call; Recording A Call - Avaya 9640G User Manual

3. Press the number(s) that corresponds to the destination extension.
4. Press Enter or OK to activate the intercom call to that extension, where the call

Tracing a malicious call

About this task
Use the Malicious Call Trace (MCT) feature to trace a malicious call. Activating MCT alerts a
controller to begin call tracing and provide information for reporting this call. This feature is
available only if your administrator has set up the phone system to trace and track malicious
calls and there is an attendant or controlling user to oversee the trace.
Procedure
1. During an active call, scroll right from the Phone screen to access the Features
2. If necessary, scroll down to MCT and press OK or just press the corresponding line

Recording a call

About this task
Use the One Touch Recording (OTR) feature to record a malicious call on your voice mail
system. This feature is available only if your administrator has set up the feature on your
telephone.
™
Avaya one-X Deskphone SIP for 9640/9640G IP Telephone User Guide
appearance identifies the incoming call with your name followed by ICOM.
menu.
button to start the trace.
An alerting tone and/or flashing LED signifies the trace is active. Hanging up
deactivates MCT.
Important:
Some countries, states, and localities have laws that determine if and under what
circumstances you can use Malicious Call Trace (MCT) Before using the MCT
feature, you must understand and comply with these laws.
Tracing a malicious call
July 2011 67