Table of Contents
Advertisement
Chapter 4-6-3
Monitor HMI to CX-Drive
• Once CCW button is turn on
HMI View
Step 2: Press and tenkey pop-up appear.
Key in 25Hz
When we let the servo motor run at Counter Clockwise(CCW) at 100,000 pulses (MAX), the result show in the
CX-Drive will be around 600rpm.
How to get 600rpm?
Servo frequency (MAX) / gear integer setting = rps x 60 = rpm
1,000,000 / 10,000 = 100rps x 60 = 600rpm
Step 1: Press the
RUN button to start
motor
SERVO View
The Speed is at
around 600 rpm
Advertisement
Table of Contents
