Table of Contents
Advertisement
Selecting the Digital Audio Output
Each DVD disc has a variety of audio output
options. Set the Digital Audio Output of the
unit according to the type of audio system
you use.
CAUTION
If the AV amplifier is not equipped with
a Dolby Digital decoder, do not select
"DOLBY DIGITAL/PCM or Stream/
PCM" in the "Digital Audio Output"
when connecting the AV amplifier with
an optical connecting cord.
Merely attemping to paly a DVD may
cause a high level of noise wihch could
be harmful to your ears and damage the
speakers. In such a case, be sure to select
"PCM".
1
Follow steps 1 and 2 of "Selection
of initial settings" on page 40.
The setup menu is displayed.
2
Press X/x to select "Digital Audio
Output".
Disc Audio
Disc Subtitle
Disc Menu
Menu Language
Rating
Password
TV Aspect
Others
Digital Audio Output
Press
to select Press ENTER button
3
Press c and then press X/x to
select the desired output press
ENTER.
*RCD-W7V.p65_40-45
DOLBY
/PCM
DIGITAL
Stream/PCM
PCM
45
• Dolby Digital/PCM
Select this when connecting to an AV
receiver or other equipment equipped with
a Dolby digital (AC-3) decoder or a Dolby
Pro Logic Surround decoder.
• Stream/PCM
Select this when connecting to an AV
receiver or other equipment euipped with a
DTS decoder or an MPEG decoder.
• PCM
Select this when connecting to an audio
system without a Dolby Digital(AC-3),
DTS or other decoder.
OUTPUT
Playable
Stream/
Dolby Digital/
Disc
PCM
PCM
96 kHz
PCM
PCM
Linear
PCM DVD
DTS
DTS bit
Not output
DVD
Stream
Dolby
Dolby Digital
Dolby Digital
Digital
bit Stream
bit Stream
DVD
MPEG
MPEG
PCM
DVD
bit Stream
Audio
PCM
PCM
CD
To turn off the SETUP Menu
Press RETURN or H (PLAY).
Note
• When this recorder is playing a CD that sampling
frequency is 96 kHz, the signal of DIGITAL
OPTICAL OUT jack is converted and outputed as
48 kHz. And the signal of ANALOG OUT (L/R)
jack is converted as analog signal and outputed as
96 kHz.
12/9/01, 6:10 PM
RCD-W7V 4-236-407-11(1)
PCM
PCM
Not output
PCM
PCM
PCM
US
45
Advertisement
Table of Contents
