16-5. Digital Copy in Vocal Select Mode (PCM-3348HR only)
Selecting the source and destination channels
1
Check that the DIGITAL COPY button is lit.
2
Press the REC READY button of the destination channel.
3
Press the REPRO button of the first source channel.
Carrying out a vocal select
After completing the channel setting, with the DIGITAL COPY button still lit, press
the PLAY button with holding down the REC (REH) button.
Digital copy (or rehearsal) begins between the selected pairs of channels.
Changing the source channel during a vocal select
Press the REPRO button of a new source channel. For example, to copy channel 5,
press the REPRO button of channel 5. The selected channel appear on the upper
source channel display.
Ending a vocal select
Press the PLAY, STOP, FF or REW button. Digital copy (or rehearsal) ends, and
the operation corresponding to the pressed button begins. The source channel
REPRO button, destination channel REC READY button, and the channels on the
channel display flash.
Terminating vocal select mode
Press the DIGITAL COPY button, turning it off. This sets all channels to the
recording inhibited state.
Digital Copy Function
39