Video Format And Input/Output Signals; Setting The Video Format - Sony PMW-EX30 Operating Instructions Manual

LCD SET
LCD Color : :
B
Cont rast :
Br i ght ness :
00:00
Back Light :
Video Format and
0 0
0
Input/Output
0
0
Signals
The video format to be used on this unit can
be set with "Video Format" of the OTHERS
menu. When the unit is used for recording,
it is required to input a signal conforming to
the video format set on the unit.
In recording or E-E mode, the type and
format of the output signal vary depending
on the input video format and the "HDMI/
CMPNT/SDI Out SEL" setting of the
VIDEO SET menu. When this unit is used
for playback, the format of the output signal
varies depending on the "HDMI/CMPNT/
SDI Out SEL" setting of the VIDEO SET
menu and the video format in which the clip
was recorded on the SxS memory card.

Setting the video format

The video format is determined by bit rate
(HQ or SP), number of effective lines,
frame rate, and scan system (i or P).
Set "Video Format" of the OTHERS menu
to a desired video format.
"Video Format"
setting
NTSC HQ 1080/60i
SP 1080/60i
HQ 1080/30P 1080/29.97PsF
HQ 1080/24P 1080/23.98PsF
HQ 720/60P
PAL HQ 1080/50i
SP 1080/50i
HQ 1080/25P 1080/25PsF
HQ 720/50P

Video Format and Input/Output Signals

Input video
format
1080/59.94i
720/59.94P
1080/50i
720/50P
31