18-3. Time Code Chase Operation Windows
Setting the lock window and display window
1
Use the numeric buttons to enter two two-digit numbers for the display window
and lock window in that order.
2
•
On the RM-3324/3348HR
Press the STORE, = and 4 buttons in that order.
•
On the RM-3324S
Press the STORE and TC CHASE buttons in that order.
Setting the re-sync window
On the RM-3324S, it is not possible to set the re-sync window.
1
Use the numeric buttons to enter a number which is ten times the required
setting.
For example, to set the window value to 12.5%, press the 1, 2 and 5 numeric
buttons in that order.
2
Press the STORE, = and 5 buttons in that order.
18-4. Setting the Sync Offset
1
Set the timer display mode to time code absolute display mode.
2
Use either of the following methods to display a numeric value on the LOCATE
TIME display.
•
Using the numeric buttons, enter the required sync time offset.
•
Press the RECALL, = and SYNC OFFSET buttons in that order, calculate the
current sync offset.
3
Press the STORE and SYNC OFFSET buttons in that order.
Correcting the sync offset
Holding down the SYNC OFFSET button, press the TRIM +/– buttons to adjust the
value. This method automatically saves the altered value.
47
Time Code Chase