Playing Back From The Sound Memory - Sony PCM-3348HR Quick Reference

15-6. Playing Back From the Sound Memory

Manual mode
1
Press the INPUT button for the destination channel.
2
Press the MEM PLAY button.
The MEM PLAY lamp lights, and playback starts from the sound memory
editing start point (the value in the SA register).
3
To abandon playback while it is in progress, press the MEM STOP button.
Auto start mode
1
•
If you know the destination channel start address for the copy from sound
memory
Using the numeric buttons, enter the required tape address on the LOCATE
TIME display, then press the STORE and MEM PLAY buttons.
•
If you do not know the destination channel start address for the copy
from sound memory
Run the tape, and press the MEM PLAY button at the required point.
2
Begin playback, recording or rehearsal of the tape from before the target start
address.
When the tape address shown on the TAPE TIME display matches the value of
PS shown on the LOCATE TIME display, sound memory playback from the
sound memory editing start point (the value in the SA register) begins
automatically.
3
To abandon playback while it is in progress, press the MEM STOP button.
Time Shift Editing Using the Sound Memory Function
29