Restrictions On Tape Time Functions - Sony PCM-3348HR Quick Reference

12. Restrictions on Tape Time Functions

References:
•
RM-3324 and RM-3324S Operation Manuals, "3-6-3 Restrictions on Tape Time
Functions"
•
PCM-3348HR Operation Manual, "2-5-3 Restrictions on Tape Time Functions"
Operations only possible in CTL modes
In order to use sector-based synchronization, always select CTL absolute or CTL
relative display mode.
When the CTL values are not continuous
Functions which cannot be used
The following functions are based on the CTL addresses, and therefore do not
operate correctly if the CTL values are not continuous. In this case, using the timer
roller counter mode, or rewriting the time code values to be continuous does not
enable operation.
•
Auto punch in/out functions
•
Sound memory auto start function (for RM-3324/RM-3348HR only)
Using return playback or repeat playback
Use the following procedure to carry out return playback or repeat playback using a
tape on which the CTL values are not continuous, by first recording the time code
values consecutively, then using the time code absolute display mode.
1
Locate the tape at the playback start point.
2
Press the PLAY button to playback, and read the time code offset value.
3
Carry out normal return playback or repeat playback.
Restrictions on Tape Time Functions
17