Faults - Kaco blueplanet 87.0 TL3 M1 WM OD IIF0 Manual

Manual
2. Disconnect the DC side using the DC isolator switch.
. DANGER! The DC cables are still live
ð After shutdown, wait 5 minutes before opening the device.
11.6

Faults

11.6.1 Procedure
DANGER
Lethal voltages are still present in the connections and cables of the device even after the device
has been switched off and disconnected!
Severe injuries or death may occur if the cables and/or terminals/busbars in the device are touched.
1. If a fault occurs, notify an appropriately authorized and qualified electrician or KACO new energy GmbH
Service.
2. The operator can only carry out actions marked with a B.
KACO blueplanet 110 TL3 KACO blueplanet 125 TL3 US
Maintenance and troubleshooting | 11
Page 93