Changing The Low Beam Bulb - APRILIA RS 50 Workshop Manual

Electrical Equipment
CHANGING
HIGH BEAM BULBS
NOTE
Extract the bulb sockets one by one, in such a
way as to avoid positioning them incorrectly during the
reassembly.
If the bulb sockets must be removed at the same time,
take care to reassemble them in the correct position.
Working on the rear right side of the front part of the
fairing, move the protection element (1) with your
hands.
Rotate the bulb socket (2) anticlockwise and extract it.
Press the bulb (3) moderately and rotate it anticlock-
wise.
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket, making the
relevant positioning seats coincide.
Correctly install a new bulb of the same type.
CHANGING
LOW BEAM BULB
NOTE
Extract the bulb sockets one by one, in such a
way as to avoid positioning them incorrectly during the
reassembly.
If the bulb sockets must be removed at the same time,
take care to reassemble them in the correct position.
Working on the rear left side of the front part of the
fairing, move the protection element (4) with your
hands.
Rotate the bulb socket (5) anticlockwise and extract it.
Press the bulb (6) moderately and rotate it anticlock-
wise.
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket, making the
relevant positioning seats coincide.
Correctly install a new bulb of the same type.
chap. 6
1
6
Release 00 2000-11
RS 50
2
3
5
4
6-25
6