Removing The Throttle Control - APRILIA RS 50 Workshop Manual

Cycle Parts
RS 50

REMOVING THE THROTTLE CONTROL

2
1
Read through the section PRECAUTIONS AND
GENERAL INFORMATION.
Place the vehicle on the stand.
Turn the ignition switch to " " .
Lock counterpoise (1) and then loosen and remove
screw (2).
Unscrew and remove the two screws (3).
4
Tightening torque for screws (3):
2 Nm (0,2 kgm) [1.5 Ft-lb].
Remove upper half shell (4) of right-hand lights switch
(5).
3
5
9
Remove the fuel tank (REMOVING THE FUEL TANK).
7
7
Unscrew and remove screws (6) from the carburettor
6
valve cover.
Tightening torque for screws (6):
2 Nm (0,2 kgm) [1.5 Ft-lb].
6
Remove throttle control cable (7) from the throttle
valve.
Disconnect oil pump control cable (8).
Disconnect the throttle control cable and the oil pump
control cable located inside lights switch (5).
Remove throttle control (9).
WARNING
When refitting, ensure that the two throttle control
8
cable adjusters are properly attached to their
respective connections.
7-11
chap. 7
Release 00 2000-11