Table of Contents
Advertisement
© Elcom, s. r. o.
Figure 5.1
X mode window.
Figure 5.2 >>
Report range specification
dialogue.
Figure 5.3
Z mode window.
54
will start the report printing) and the Clear button that will cancel the previous report se-
lection displayed in the row below the report buttons. The report is selected by pressing the
respective button (by tapping on the touch sensitive display or by using the Tab keys
and pressing Space
range specification dialogue prior report execution (see figure 5.2)
>
Z mode
The Z report mode offers these report types: PLU,
daily, monthly, hourly, customer, and receipts. In
this mode, financial, departments, and cashiers are
parts of the daily report.
The following subchapters contain descriptions of
individual report types. The main difference betwe-
en the X and Z mode is that the reports made in the
Z mode erase the data once run.
>
Z mode window
In the Z mode window there is also the electronic receipt. The window also contains the
obligatory Exit button, then the Print button (that will start the report printing) and
the Clear button that will cancel the previous selection displayed in the row below the
report buttons. The report is selected by pressing the respective button (by tapping on
the touch sensitive display or by using the Tab keys
/
). The reports that allow range selection, display the range specification dialogue
prior report execution (see figure 5.2).
POS-3000
/
). The reports that allow range selection, display the
Reports
/
and pressing Space
/
Advertisement
Table of Contents
Need help?
Do you have a question about the POS-3000 and is the answer not in the manual?
Questions and answers