SMC Networks ISA3 Series Operation Manual page 84
Digital gap checker pressure switch
Hide thumbs
Also See for ISA3 Series:
- Manual (1 page) ,
- Operation manual (64 pages) ,
- Operation manual (114 pages)
Table of Contents
Advertisement
Process data (detection distance)
value output
Press the UP or DOWN button to select
forcibly output ON/OFF to check the
output condition.
: Bit offset: 48 to 63 in the process data will change to 0 (Forcibly output OFF)/
1500 (Forcibly output ON).
Press the SET button to set.
Process data (SUP port side
pressure) value output
Press the UP or DOWN button to select
forcibly output ON/OFF to check the
output condition.
: Bit offset: 32 to 47 in the process data will change to 0 (Forcibly output OFF)/
2000 (Forcibly output ON).
Press the SET button to set.
Process data (SUP port side
pressure) value output
Press the UP or DOWN button to select
forcibly output ON/OFF to check the
output condition.
: Bit offset: 16 to 31 in the process data will change to 0 (Forcibly output OFF)/
2000 (Forcibly output ON).
Press the SET button to set.
-83-
4
How to use
Return to the output check.
No.PS※※-OMW0009-A
Advertisement
Table of Contents
