SMC Networks ISA3 Series Operation Manual page 58
Digital gap checker pressure switch
Hide thumbs
Also See for ISA3 Series:
- Manual (1 page) ,
- Operation manual (64 pages) ,
- Operation manual (114 pages)
Table of Contents
Advertisement
■[F 2] Setting of OUT2
The setting of Output OUT2 can be performed.
Pressure detection on the OUT port or pressure detection or distance detection on the SUP port can be set.
Please refer to the "List of output modes" on page
<Operation>
Press the UP or DOWN button in function selection mode to display [F 2].
Output setting
Press the UP or DOWN button to select the desired output mode.
Press the SET button to set.
Output mode setting
Press the UP or DOWN button to select the required output mode.
•When distance detection, SUP port side pressure or OUT port side
pressure is selected
•When other items are selected
Press the SET button to set.
60
for the relationship between the set items and operation.
Press the SET button.
Move on to reversed output setting.
-57-
Move on to output setting.
Move on to output mode setting.
4
How to use
[OFF] Switch output
OFF is selected
Press the SET button
to move on to display
colour setting.
No.PS※※-OMW0009-A
Advertisement
Table of Contents
