SMC Networks ISA3 Series Operation Manual page 7

Usage
Do not short-circuit the load.
When the load is short circuit, generated excess current lead to cause the damage of the product.
Do not press the setting buttons with a sharp pointed object.
It may damage the setting buttons.
During the any setting, the product will switch the output according to the existing settings
until the changes are complete.
Confirm the output has no adverse effect on machinery and equipment before setting.
Stop the control system before setting if necessary.
Perform settings suitable for the operating conditions.
Incorrect setting can cause operation failure.
For details of each setting, refer to each "Setting" page
Do not touch the LCD during operation.
The display can vary due to static electricity.
Maintenance Service
Drain system regularly.
If condensate enters the secondary side, it may cause malfunction of pneumatic equipment.
◆ Please read and understand the cautions in the Operation Manuals for
VX2 series (2 port solenoid valve) and AR20 series (Regulator) before
use.
Warning
44 of this manual.
-6-
1 Before Use
No.PS※※-OMW0009-A