SMC Networks ISA3 Series Operation Manual page 68

Table showing the output mode and output form when Md1 and Md2 are selected.
Output mode
Hysteresis mode
Window comparator mode
Error output
Switch output off
When using the 2 value display function, 3 step setting is not available for the display.
(When setting 3 step, select each set value to be displayed by pressing the UP or DOWN button.)
When output operation mode is changed after selecting the 2 value display, the selected display items will
not be applicable and [- - -] will be displayed. In this case, select items for the 2 value display setting again.
Output style
Normal output
Reversed output
Normal output
Reversed output
Normal/Reversed output
―
-67-
4 How to use
Display style
No.PS※※-OMW0009-A