SMC Networks ISA3 Series Operation Manual page 11

2 About this product
1: To be used for the rated distance range of "F".
2: To be used for the rated distance range of "G" or "H".
3: ISO1179-1
4: The new Measurement Law prohibits the use of pressure switch with the units selection function in Japan.
5: Fixed unit: kPa
6: Cannot be selected for 1 station.
7: At the factory, the options are not attached to the product, but packed together with it for shipment.
8: The electrical entry of centralized lead wire for M12 connector is on the right side.
If the supply port on the right side is used, arrange the centralized lead wire so that it does not interfere with the control unit.
9: The bracket for control unit will be assembled before shipment.
10: Made to order
11: When the control unit is mounted, the piping specifications of the supply port will be changed due to piping specification of the gap
checker.
12: ISO16030
-10-
No.PS※※-OMW0009-A