Changing Password Settings - Siemens SIMATIC HMI KP300 Basic mono PN Operating Instructions Manual

Configuring the HMI device
5.1 Configuring devices with graphical Control Panel
5.1.11

Changing password settings

Password protection prevents unauthorized access to the Control Panel.
NOTICE
The password cannot contain spaces or special characters * ? . % / \ ' ".
If the password is no longer available for the Control Panel, you first have to update the
operating system before you can make any changes in the Control Panel. All data on the
HMI device will be overwritten when you update the operating system.
Procedure – activating password protection
Procedure – Deactivating password protection
78
1. Press "Password" to open the "Password
2. Enter a password in the "Password" text box.
3. Confirm the password in the "Confirm
4. Close the dialog and save your entries with
A
A
1. Press "Password" to open the "Password
2. Delete the entries in the "Password" text box.
3. Delete the entries in the "Confirm Password"
4. Close the dialog and save your entries with
A
A
Properties" dialog.
Touch the text box. The alphanumerical
screen keyboard is displayed.
Password" text box.
"OK".
Properties" dialog.
text box.
"OK".
Operating Instructions, 04/2012, A5E02421799-03
Basic Panels