Technical Specifications; Certificates And Approvals - Siemens SIMATIC HMI KP300 Basic mono PN Operating Instructions Manual

Technical specifications

8.1

Certificates and approvals

Approvals
The following overview shows possible approvals.
The HMI device itself is certified as shown on the rear panel labels.
CE approval
The HMI device meets the general and safety-related requirements of the following EC
directives and conforms to the harmonized European standards (EN) for programmable logic
controllers published in the official gazettes of the European Union:
● 2004/108/EC "Electromagnetic Compatibility" (EMC Directive)
EC Declaration of Conformity
The EC Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Industry Sector
I IA AS FA WF AMB
PO Box 1963
D-92209 Amberg, Germany
Marking for Australia
The HMI device fulfills the requirements of standard AS/NZS 2064 (Class A).
UL approval
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
IEC 61131
The HMI device fulfills requirements and criteria to IEC 61131-2, Programmable Logic
Controllers, Part 2: Operating resource requirements and tests.
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
CAUTION
8
117