Safety Instructions; General Safety Instructions - Siemens SIMATIC HMI KP300 Basic mono PN Operating Instructions Manual

Safety instructions

2.1

General safety instructions

Working on the control cabinet
Open equipment
The HMI device is open equipment. That means that the HMI device may only be installed
in cubicles or cabinets that provide front panel access for operating the device.
The cubicle or cabinet in which the HMI device is installed may only be accessed with a key
or tool and only by trained, authorized personnel.
Dangerous voltage
Opening the cabinet will expose high voltage parts. Contact with these parts could be fatal.
Always disconnect the cabinet from the mains before opening it.
High frequency radiation
NOTICE
Unwanted operating states
High-frequency radiation, for example, from cellular phones, can trigger unwanted
operating states.
Installation as intended
Installation only in machinery that conforms to the machinery directive
It is not allowed to commission the HMI device unless it has been verified that the machine
in which the HMI device is to be installed complies with Directive 2006/42/EC.
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
WARNING
WARNING
2
25