Setting The Screen Saver; Setting Acoustic Signals - Siemens SIMATIC HMI KP300 Basic mono PN Operating Instructions Manual

5.1.12

Setting the Screen Saver

NOTICE
Burn-in effect
The screen contents may leave a faint version (ghost) of the image in the background if
they appear for too long.
The "ghost" will disappear automatically after some time. The longer the same content is
displayed on the screen, the longer it will take for the burn-in effect to disappear.
The screen saver helps to prevent burn-in.
Always use the screen saver.
5.1.13

Setting acoustic signals

This function is only available for touch screen devices.
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
5.1 Configuring devices with graphical Control Panel
A
Configuring the HMI device
1. Press "Screensaver" to open the
"Screensaver Settings" dialog.
2. Enter the number of minutes before the
screen saver is to be activated.
Touch the text box to do this. You can enter
values from 5 to 360 minutes. Entering "0"
disables the screen saver.
3. Close the dialog and save your entries with
"OK".
1. Press "Sound Setting" to open the "Sound
Settings" dialog.
2. Select the "Sound ON" check box. If the
"Sound ON" check box is selected, you get
acoustic feedback when you touch the
touch screen.
3. Close the dialog and save your entries with
"OK".
79