Updating The Operating System Using Prosave - Siemens SIMATIC HMI KP300 Basic mono PN Operating Instructions Manual

Commissioning a project
6.6 OS update - Basic Panel DP
6.6.4

Updating the Operating System using ProSave

Requirements
● The HMI device is connected to a PC on which ProSave is installed.
● When updating the operating system without reset to factory settings only:
Procedure
Proceed as follows:
1. When updating the operating system with reset to factory settings only:
2. Go to the Windows Start menu and start ProSave on the PC.
3. Select the HMI device type in the "General" tab.
4. Select the type of connection between the HMI device and the PC, then set the
5. Select the "OS Update" tab.
6. Select whether to update the operating system with or without restoring the factory
7. Select the HMI device image file "*.img" under "Image path".
8. When updating without reset to the factory settings only:
9. Select "Update OS" on the PC to run the operating system update.
10. When updating with reset to the factory settings only:
11. Follow the instructions in ProSave.
Result
A message is displayed when the operating system update is successfully completed.
The HMI device no longer contains any project data.
104
The data channel is configured on the HMI device.
Switch off power to the HMI device.
connection parameters.
settings by setting the "Reset to factory settings" check box accordingly.
WinCC flexible: The HMI device image files are available under "WinCC flexible Images"
in the WinCC flexible installation folder or on the installation CD.
WinCC: The HMI device image files are available under "Programme\Automation\Portal
V11\Data\Hmi\Transfer\11.0\Images".
The output area provides information on the version of the successfully opened HMI
device image file.
Set "Transfer" mode on the HMI device.
If automatic transfer mode is enabled on the HMI device, the device automatically sets
"Transfer" mode when an update is initiated.
Switch on the power supply to the HMI device.
A progress bar indicates the progress of the operating system update.
Operating Instructions, 04/2012, A5E02421799-03
Basic Panels