Mounting The Hmi Device - Siemens SIMATIC HMI KP300 Basic mono PN Operating Instructions Manual

Mounting and connecting

3.2 Mounting the HMI device

3.2 Mounting the HMI device
Required tools and accessories
Inserting the HMI device
34
Slotted screwdriver, size 2
Mounting clamp type
Aluminum mounting clamps
Plastic mounting clamps
For HMI device
KTP400 Basic mono
KTP600 Basic
KTP1000 Basic
TP1500 Basic:
KP300 Basic
KP400 Basic
KTP400 Basic color
1. If necessary, insert the mounting
seal in the groove on the back of the
HMI device front panel.
Make sure that the mounting seal is
not twisted. A correctly inserted
mounting seal is required to ensure
IP65 degree of protection.
2. Insert the HMI device into the
mounting cutout from the front.
Ensure that the protruding labeling
strips are not caught between the
mounting cutout and HMI device.
Operating Instructions, 04/2012, A5E02421799-03
Required quantity
5
6
12
14
4
7
5
Basic Panels