Siemens SIMATIC HMI KP300 Basic mono PN Operating Instructions Manual page 30

Mounting and connecting
3.1 Preparations
Horizontal mounting position
Angled mounting position
Exceeding the ambient temperature
Forced ventilation is required if the maximum permitted ambient temperature for operating
the HMI device is exceeded. The HMI device can otherwise be damaged and its approvals
and warranty will be void.
See also
Conditions of use (Page 138)
30
50 °C
0 °C
40 °C
0 °C
CAUTION
All Basic HMI devices are suitable for
horizontal mounting positions.
The maximum ambient temperature at
the device with vertical mounting in
horizontal positions is 50 °C
The following Basic HMI devices are
also suitable for vertical mounting
positions:
•
•
The maximum ambient temperature at
the device with vertical mounting in
vertical positions is 40 °C
The Basic HMI devices are self-
ventilating. Vertical and angled
mounting is permitted in:
•
•
•
•
40 °C
0 °C
Operating Instructions, 04/2012, A5E02421799-03
KTP400 Basic
KTP600 Basic
Mounting cabinets
Control cabinets
Switchboards
Consoles
Basic Panels