Ricoh MP C6502SP System Maintenance page 849

Successful Download
In the two diagrams below, the firmware was set to be downloaded by the day before the next
scheduled visit. In the first diagram, the download was successful on the first try. In the second
diagram, the download failed three times and was successful on the fourth try.
• If the firmware download fails or cannot be completed due to network settings/condition, no
power to the machine, or other reason, the machine will continue retrying every six hours until the
scheduled deadline (up to a maximum of four tries). For example, if the download is set for the day
before the next visit, the machine will attempt the download at 24 hours before the visit, and then
continue trying every six hours (max. four tries total).
• The retry is only performed in cases where the firmware download has failed.
• If the machine is in Energy Saver mode when the download is scheduled to begin, the download
will be performed in the background and the machine/panel will stay in Energy Saver mode.
• The download will continue uninterrupted even if the user initiates a print job, copy job, fax
receiving or other operation while the download is in progress.
• The download will be terminated if the user turns the power off while the download is in progress.
Package Firmware Update (D135/D136 only)
847