Ricoh MP C6502SP System Maintenance page 55

Abp[1] Lwr Threshold
010
Sets Abp[1] Lower Threshold for OPC Cycle of Development Bias.
Abd[1] Lwr Threshold
011
Sets Abd[1] Lower Threshold for Development Roller Cycle of Development Bias.
deltaP_Upp Threshold
020
Sets the deltaP_Upp Threshold per rotating body rotation of Adhesion amount patch.
3671 [Vc:Coef:Setting]
Scp[1]
001
Sets Frequency Correction Coefficient Scp[1] for OPC Cycle amplitude of Vc.
Kcp1
011
Sets Line Speed: Mid Correction Coefficient Kcp1 for OPC Cycle amplitude of Vc.
Kcp2
012
Sets Line Speed: Low Correction Coefficient Kcp2 for OPC Cycle amplitude of Vc.
Scd[1]
051
Sets Frequency Correction Coefficient Scd[1] for Development Roller Cycle amplitude of
Vc.
Kcd1
061
Sets Line Speed: Mid Correction Coefficient Kcd1 for Development Roller Cycle amplitude
of Vc.
Kcd2
062
Sets Line Speed: Low Correction Coefficient Kcd2 for Development Roller Cycle amplitude
of Vc.
tadj_c:K
071
Sets tadj_c (K) time for Vc (K).
[0.000 to 0.100 / 0.005 /
*ENG
0.001mg/cm2/step]
[0.000 to 0.100 / 0.005 /
*ENG
0.001mg/cm2/step]
*ENG [0.0 to 180.0 / 60.0 / 0.1deg/step]
*ENG [0.00 to 2.55 / 1.00 / 0.01/step]
*ENG [0.00 to 2.55 / 1.00 / 0.01/step]
*ENG [0.00 to 2.55 / 0.90 / 0.01/step]
*ENG [0.00 to 2.55 / 1.10 / 0.01/step]
*ENG [0.00 to 2.55 / 1.00 / 0.01/step]
*ENG [0.00 to 2.55 / 0.90 / 0.01/step]
[-0.500 to 0.500 / 0.000 / 0.001s/
*ENG
step]
SP3-XXX (Process)
53