Ricoh MP C6502SP System Maintenance page 346

3. Main SP Tables-5
002 Local Port
5857 [Debug Log Save]
Save Debug Log
Enables log trace function or debug log saving function. The debug log cannot be captured
until this feature is switched on.
• 0: Enables log trace function
• 1: Enables debug log saving function
001
• 2: OFF
• If "0" is selected, it disables the settings of SP5857-002 to 013 and gives executing
failure. If "1" is selected, it disables ordinarily saving function; however, SP5857-101
to 112 are able to execute.
Target (2:HDD 3:SD)
002
Sets the storage location for the debug log.
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
005
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
Save to SD Card
006
Saves the debug log of the input SC number in memory to the SD card.
344
[0 or 1 / 0 / 1/step]
*CTL 0: Disable
1: Enable
*CTL [0 to 2 / 0 / 1/Step]
[ 1 to 3 / 2 / 1/step]
1:IC Card
*CTL
2: HDD
3: SD Card
*CTL [-999999 to 9999999 / - / 1/step]
*CTL [-999999 to 9999999 / - / 1/step]