Ricoh MP C6502SP System Maintenance page 536

5. Main SP Tables-7
002 Change Time : Last1
101 Initialize Time : Latest
102 Initialize Time : Last1
7852 [DF Glass Dust Check]
Dust Detection Counter
Records the time of detecting dust on all points of surface scanning position.
001
Decides as same dust and won't count it when detected even before the next job.
*Counts when SP4-020-001: DF Scanning glass dust detect setting chart is ON.
Dust Detection Clear Counter
For checking effect for surface scan position move.
002
Counts the times for stripes avoided by detecting dust and moving scan position of sheet
through DF.
*Counts when SP4-020-001: DF Scanning glass dust detect setting chart is ON.
Dust Detection Counter: Back
Counts the times for detecting dust at all points of rear face scanning position.
003
Decides as same dust and won't count it when detected even before the next job.
*Counts when SP4-020-001: DF Scanning glass dust detect setting chart is ON.
7855 [Coverage Range]
001 Coverage Range 1
002 Coverage Range 2
[Assert Info.]
7901
Records the location where a problem is detected in the program. The data stored in this SP
is used for problem analysis.
001 File Name
002 Number of Lines
003 Location
534
*CTL [- / - / -]
*CTL [- / - / -]
*CTL [- / - / -]
*ENG [0 to 65535 / 0 / 1/step]
*ENG [0 to 65535 / 0 / 1/step]
*ENG [0 to 65535 / 0 / 1/step]
*CTL [0 to 200 / 5 / 1time/step]
*CTL [0 to 200 / 20 / 1time/step]
*CTL [- / - / -]
*CTL [- / - / -]
*CTL [- / - / -]