Ricoh MP C6502SP System Maintenance page 19

053 Feed Counter:M
054 Feed Counter:Y
3110 [TNE Detect(Lvl1) :Set]
ON/OFF
001
Sets whether to display Toner Near End (Level 1) on the operation panel.
Disp Timing:K
011
Sets whether to display Toner Near End (Level 1) on the operation panel at which
percentage of Toner Remains.
Disp Timing:C
012
Sets whether to display Toner Near End (Level 1) on the operation panel at which
percentage of Toner Remains.
Disp Timing:M
013
Sets whether to display Toner Near End (Level 1) on the operation panel at which
percentage of Toner Remains.
Disp Timing:Y
014
Sets whether to display Toner Near End (Level 1) on the operation panel at which
percentage of Toner Remains.
3120 [TNE Detect(Lvl2) :Set]
Set Cnt
001
Sets the timing when Toner Near End (Level 2) is set after how many times Toner End
Sensor continuously detects Toner Empty.
Cnt:K
011
Displays how many times Toner End Sensor (K) continuously detects Toner Empty.
Cnt:C
012
Displays how many times Toner End Sensor (C) continuously detects Toner Empty.
[0.0 to 99999999.0 / 0.0 / 0.1mg/
*ENG
step]
[0.0 to 99999999.0 / 0.0 / 0.1mg/
*ENG
step]
*ENG [0 to 1 / 0 / 1/step]
*ENG [10 to 100 / 10 / 1%/step]
*ENG [10 to 100 / 10 / 1%/step]
*ENG [10 to 100 / 10 / 1%/step]
*ENG [10 to 100 / 10 / 1%/step]
*ENG [0 to 255 / 30 / 1count/step]
*ENG [0 to 255 / 0 / 1count/step]
*ENG [0 to 255 / 0 / 1count/step]
SP3-XXX (Process)
17