Ricoh MP C6502SP System Maintenance page 24

1. Main SP Tables-3
Current: M
003
Current TD Sensor Output Voltage Target Value: Displays/Sets Vtref (M).
Current: Y
004
Current TD Sensor Output Voltage Target Value: Displays/Sets Vtref (Y).
3232 [Vtref Correct:Pixel]
ON/OFF
001
Sets ON/OFF for Pixel Vtref Correct Correction.
3233 [PPAT Vtref Corr :Disp/Set]
Vtavg Rate(H)
041
Sets the weight of Vtavg and Vtref used for Vtref Correction Standard Value when Paper
Interval Adhesion Amount exceeds Adhesion Amount Threshold (Upper Limit).
Vtavg Rate(M)
051
Sets the weight of Vtavg and Vtref used for Vtref Correction Standard Value when Paper
Interval Adhesion Amount exceeds Adhesion Amount Threshold (Lower Limit).
Vtavg Rate(L)
061
Sets the weight of Vtavg and Vtref used for Vtref Correction Standard Value when Paper
Interval Adhesion Amount exceeds Adhesion Amount Threshold (Lower Limit).
[ImgArea :Disp]
3250
Displays image area of latest page.
001 Latest:K
002 Latest:C
003 Latest:M
004 Latest:Y
3251 [DotCoverage :Disp]
22
*ENG [0.00 to 5.00 / 2.70 / 0.01V/step]
*ENG [0.00 to 5.00 / 2.70 / 0.01V/step]
*ENG [0 to 1 / 1 / 1/step]
*ENG [0 to 100 / 50 / 1%/step]
*ENG [0 to 100 / 50 / 1%/step]
*ENG [0 to 100 / 50 / 1%/step]
*ENG
*ENG
[0 to 9999 / 0 / 1cm2/step]
*ENG
*ENG