Connect the positive cable (10, fig. 154), previously
assembled to ABS cable (11, fig. 154), to battery
positive terminal, and negative cable (12, fig. 154) to
battery negative terminal by starting the other screw
(9, fig. 154) in its thread.
Tighten the terminal clamp screws (9, fig. 154) to a
torque of 3.69 lbf-ft (5 Nm) ±10% and apply grease
onto the battery terminals to prevent oxidation.
Reposition the battery (8, fig. 155) in the support,
positioning the cables (10, fig. 155) and (11, fig. 155)
as shown in fig. 155.
9
8
8
10
12
10
11
fig. 154
11
fig. 155
183