Ducati Diavel ABS 2012 Owner's Manual page 109

"SPEED" setting
This function allows you to change the speed
measurement units (and therefore those of distance
traveled).
Currently set unit of measurement is highlighted in
green on the display; use button (1, fig. 23) "▲" or (2,
fig. 23) "▼" to shift the arrow on the left onto the
new setting and confirm by pressing the reset button
(12, fig. 21).
Save the setting and, when coming back to main
screen, any new unit of measurement set will be
present.
1) km/h: by setting this condition the following
values will have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL : km
- Vehicle speed and AVERAGE speed (SPEED
AVG): km/h
2) mph : by setting this condition the following
values will have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL : miles
- Vehicle speed and AVERAGE speed (SPEED
AVG): mph.
To exit the setting function, press the reset button
(12, fig. 21) when "EXIT" is highlighted.
"TEMPERATURE" setting
This function allows you to change the units of
measurement of the temperature.
Currently set unit of measurement is highlighted in
green on the display; use button (1, fig. 23) "▲" or (2,
fig. 23) "▼" to shift the arrow on the left onto the
new setting and confirm by pressing the reset button
(12, fig. 21).
Save the setting and, when coming back to main
screen, any new unit of measurement set will be
present.
3) °C: by setting this condition the following values
will have the same units of measurement:
- Engine coolant temperature and T_AIR: °C
4) °F: by setting this condition the following values
will have the same units of measurement:
- Engine coolant temperature and T_AIR: °F
To exit the setting function, press the reset button
(12, fig. 21) when "EXIT" is highlighted.
107