Ducati Diavel ABS 2012 Owner's Manual page 122

PIN CODE change function
This function changes your four number PIN CODE.
To access the function it is necessary to view the
"setting" menu page 72, using button (1, fig. 23)
"▲" or (2, fig. 23) "▼" select the "PIN CODE"
function and press the reset button (12, fig. 21) to go
to next page.
Note
If "INSERT NEW PIN CODE" and the dashes
"- - - -" appear when accessing this function, this
means that the function was not active as the PIN
CODE was never entered. Enter your PIN as
described in the previous paragraph "PIN CODE
activation function".
When accessing the function, "MODIFY PIN
CODE", "OLD PIN" with four dashes "- - - -" in the
bottom line will appear on the display highlighted in
green; now enter the 4 digit code.
Note
To change the PIN, you must know the currently
stored PIN.
Now enter the "old" PIN code (OLD PIN). Press the
reset button (12, fig. 21); each time you press the
button (2, fig. 23) "▼" the displayed number
120
increases from "0" to "9" and then returns to "0"; to
confirm the number, press the reset button (12,
fig. 21). Repeat the procedure until inserting the
fourth digit. Press the reset button (12, fig. 21) again
to confirm.
If the entered code is incorrect, the dashboard will
return to the four dashes " - - - - " in order to enter the
code again.
If the entered code is correct, "CORRECT" is
automatically highlighted in green for about 2
seconds and then the four dashes " - - - - " next to
"NEW PIN" indication are automatically highlighted;
now enter the "new" 4 digit code.
Press the reset button (12, fig. 21); each time you
press the button (2, fig. 23) "▼" the displayed
number increases from "0" to "9" and then returns
to "0"; to confirm the number, press the reset button
(12, fig. 21). Repeat the procedure until inserting the
fourth digit. Press the reset button (12, fig. 21) again
to confirm.
Item "MEMORY" is automatically highlighted.