Dtc (Ducati Traction Control) Setting Function - Ducati Diavel ABS 2012 Owner's Manual

DTC (Ducati Traction Control) setting
function
This function allows you to customize the level of
DTC intervention (Ducati Traction Control) or disable
it for every riding mode.
To access the function it is necessary to view the
"setting" menu page 72: using button (1, fig. 23)
"▲" or (2, fig. 23) "▼" select the "RIDING MODE"
function and press the reset button (12, fig. 21) to go
to next page.
Use button (1, fig. 23) "▲" or (2, fig. 23) "▼" to
select the riding style to change and press the reset
button (12, fig. 21).
To go to next page, use button (1, fig. 23) "▲" or (2,
fig. 23) "▼" to select the "DTC" indication and press
the reset button again (12, fig. 21) to confirm
selection.
When accessing the function, the currently set DTC
level appears at the lefthand side of the display inside
a rectangle (e.g. DTC 1).
Use button (1, fig. 23) "▲" or (2, fig. 23) "▼" to
select the new intervention level (1 to 8) or OFF to
disable the Traction Control; after selecting the new
setting, press the reset button (12, fig. 21) to
highlight "MEMORY" indication.
At this point, store the new setting by pressing and
holding the reset button (12, fig. 21) for 3 seconds
with "MEMORY" displayed. If the setting has been
76
stored successfully, the display will show
"MEMORIZED" in green for 2 seconds and the EXIT
option will be highlighted automatically.
To exit the setting function, press the reset button
(12, fig. 21) when "EXIT" is highlighted.