Ducati Diavel ABS 2012 Owner's Manual page 120

PIN CODE activation function
To access the function it is necessary to view the
"setting" menu page 72, using button (1, fig. 23)
"▲" or (2, fig. 23) "▼" select the "PIN CODE"
function and press the reset button (12, fig. 21) to go
to next page.
Note
If "MODIFY PIN CODE" appears when
accessing this function, this means that there is
already a stored PIN and therefore the function is
already active.
When accessing the function, "INSERT NEW PIN
CODE" with four dashes "- - - -" in the bottom line
will appear on the display highlighted in green; now
enter a 4 digit code.
Entering the code:
press the reset button (12, fig. 21).
Each time you press the button (2, fig. 23) "▼" the
displayed number increases from "0" to "9" and
then returns to "0";
to confirm the number, press the reset button (12,
fig. 21).
Repeat the procedure until inserting the fourth digit.
To highlight the "MEMORY" indication, press the
reset button (12, fig. 21) again.
118
To store the entered PIN, press the reset button (12,
fig. 21) for 3 seconds with "MEMORY" indication
highlighted in green.
As a confirmation of PIN storage, the display will
show the message "MEMORIZED" for about 2
seconds and then automatically highlight "EXIT"
option.
From this moment, "MODIFY PIN CODE" will be
displayed when accessing the "PIN CODE" function
and the PIN can be changed again as many times as
necessary (without limits).
To exit the setting function, press the reset button
(12, fig. 21) when "EXIT" is highlighted.