Table of Contents
Advertisement
WIRING:
Open the ticket dispenser door(s) on the
game.
Unplug the ticket dispenser(s). The housing
should look like this:
If the housing does not look like the above, some
cable modifications may be necessary.
ONE TICKET TRAY:
Open the Evolve box and locate the "Ticket 1"
input cable (the one nearest you), and de-
termine if you will need the included 3-foot
extension cable. DIP 4 must be ON.
Plug the Evolve box into the cable that was
previously connected to the ticket dispenser;
the ticket signal cable.
TWO TICKET TRAYS:
If there are two ticket dispensers on the game,
Evolve should be connected to both of them.
Locate the "Ticket 2" input cable, add the
extension cable and connect it to the second
ticket signal cable from the game. Turn DIP 4
to OFF.
INSTALLATION GUIDE
9
Advertisement
Table of Contents
