SUPPLY HYDRAULIC DRAWING FOR SEVERAL LIQUID FUEL BURNERS
WITH MAXIMUM NOMINAL VISCOSITY (5°E AT 50°C)
1 - Main tank
2 - Filter
3 - Fuel and degasser recovery
4 - Non-return valve
5 - Filter
6 - By-pass (normally closed)
7 - Non-return valve
8 - By-pass (normally closed)
The oil recovery tanks (diameter ~ 150 mm - height ~ 400 mm)
must be installed as close as possible to the burner at least 0.5 m
above the burner pump.
11 / 42
0006080764 _201312