2 - Disconnect the atomising group and head tie rods
3 - Disconnect the heating element connector
4 - Disconnect the ignition electrode cable
5 - Unscrew the Woss coupling nut to take out the pilot tube
6 - Take out the hinge pivot
7 - Take out the hinge upper screw and open the burner
8 - Take out the blocking screw of the atomising group
9 - Take out the atomising group to dismount the nozzle
10 - Take out the four fixing screws of the group holder
11 - Take out the group holder and flame disks
34 / 42
0006080764 _201312