Getting Started; Registration - Lantronix Open-Q 212A User Manual

Table of Contents

Open-Q 212A Development Kit

Figure 1 Assembled Open-Q 212A Development Kit

The development kit comes with Linux Home Hub OS software pre-programmed on the SOM. Please contact

Lantronix for availability of display adaptors, camera modules, sensor boards, and other accessories:

sales@lantronix.com

3.5 Getting Started

This section explains how to setup the Open-Q 212A Development Kit and start using it.

To register the development kit and gain access to the Lantronix support site, please visit:

http://www.intrinsyc.com/resources.

To proceed with registration, the development kit serial number is required. The serial number can be found

on the label on the top side of the SOM. The label contains the Serial Number and WIFI MAC address.

Note: Please retain the SOM and carrier board serial number for warranty purposes.

Please visit

http://tech.intrinsyc.com/projects/serialnumber/wiki

for more details about locating the serial

number for registering the development kit.

Open-Q™ 212A Development Kit User Guide

Table of Contents

Do you have a question about the Open-Q 212A and is the answer not in the manual?