Atto Fibrebridge 2390C/R/D Features, Benefits; Atto Fibrebridge 2400C/R/D Features, Benefits - ATTO Technology FibreBridge 2370E Installation And Operation Manual

ATTO FibreBridge 2390C/R/D features, benefits

The ATTO FibreBridge 2390C/R/D is a 4-Gigabit
Fibre Channel-to-SCSI bridge configured with a
single 4-Gb Fibre Channel port and dual-stacked
Ultra320 SCSI buses featuring VHDCI interfaces.
Designed to integrate industry-leading
performance and SAN capabilities into advanced
storage solutions, the FibreBridge 2390 uses a
high performance architecture suited for tape
automation OEMs who wish to integrate high
performance LTO-3 and SDLT600 tape drives
into 4-Gb Fibre Channel SANs, as well as disk
OEMs looking to add 4-Gb Fibre Channel
connectivity to their disk storage devices.
• One 4-Gb Fibre Channel port which auto-
negotiates to 1-Gb, 2-Gb or 4-Gb Fibre Channel

ATTO FibreBridge 2400C/R/D features, benefits

The ATTO FibreBridge 2400C/R/D is a 4-Gigabit
Fibre Channel-to-SCSI bridge configured with
dual independent 4-Gb Fibre Channel ports and
dual-stacked Ultra320 SCSI buses featuring
VHDCI interfaces.
Designed to integrate industry-leading
performance and SAN capabilities into future
generation storage solutions, the FibreBridge
2400 uses a high performance architecture suited
for tape automation OEMs who wish to integrate
high performance LTO-3 and SDLT600 tape
drives into 4-Gb Fibre Channel SANs, as well as
disk OEMs looking to add 4-Gb Fibre Channel
connectivity to their disk storage devices.
• Two independent 4-Gb Fibre Channel ports
which auto-negotiate to 1-Gb, 2-Gb or 4-Gb
Fibre Channel
• SFP FC connector
• Support for direct connect to F-port fabric
switches, full duplex FC data transfers and FC-
AL, PLDA and public look login
• Two independent Ultra320 SCSI buses
• Dual-stacked VHDCI SCSI connectors
• Backward compatible with all single-ended SCSI
devices and all previous SCSI protocols
• Manual and auto SCSI device mapping
• 215 MB/sec. maximum throughput
• ExpressNAV integrated management console
for remote configuration, management and
diagnostic capabilities
• Supports SCSI hard disk drives, tape drives and
CD libraries
• SFP FC connectors
• Support for direct connect to F-port fabric
switches, full duplex FC data transfers and FC-
AL, PLDA and public look login
• Two independent Ultra320 SCSI buses
• Dual-stacked VHDCI SCSI connectors
• Backward compatible with all single-ended SCSI
devices and all previous SCSI protocols
• Manual and auto SCSI device mapping
• 440 MB/sec. maximum throughput
• ExpressNAV integrated management console
for remote configuration, management and
diagnostic capabilities
• Supports SCSI hard disk drives, tape drives and
CD libraries
2