Appendix C Standards And Compliances; Fcc Standards: Radio And Television Interference; Canadian Standards; European Standards - ATTO Technology FibreBridge 2370E Installation And Operation Manual

Appendix C
The equipment described in this manual generates and uses radio frequency energy. If this equipment
is not used in strict accordance with the manufacturer's instruction, it can and may cause interference
with radio and television reception. Refer to the ATTO FibreBridge Technical Specification sheet for
your particular model for a full list of certifications for that model.
interference when the equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at own expense.
If this equipment does cause interference to radio and television reception, which can be determined by
turning the equipment off and on, try to correct the interference by one or more of the following
measures:
• Move the receiving antenna.
• Relocate the bridge with respect to the receiver,
or move the bridge away from the receiver.
• Plug the computer into a different outlet so the
computer and receiver are on different branch
circuits.
The booklet How to Identify and Resolve Radio/TV Interference Problems prepared by the Federal
Communications Commission is a helpful guide. It is available from the US Government printing office,
Washington, DC 20402, Stock No. 004-000-00345-4.

European Standards

Declaration of Conformity

This following statement applies to the ATTO FibreBridge.
This device has been tested in the basic operating configuration and found to be
compliant with the following European Union standards:
Application of Council Directive: 89/336/EEC
Standard(s) to which conformity is declared: EN55022, EN50082-1, EN60950
xvii
ATTO Technology Inc. FibreBridge Installation and Operation Manual
Standards and compliances

FCC Standards: Radio and Television Interference

This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful

Canadian Standards

This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
• If necessary, consult an ATTO authorized
dealer, ATTO Technical Support Staff, or an
experienced radio/television technician for
additional suggestions.