Checking/Changing The Water In The Wet Filter Cartridge - Ametek SPECTRO SPECTROCHECK Original Operating Instructions

8.4.2

Checking/changing the water in the wet filter cartridge

In order to check the water, proceed as follows:
1. Check the water level inside the
filter cartridge.
 The filter cartridge must be
filled half with water (1).
(Min. filling level 50%, max.
filling level 75%).
 The water must be clean.
2. To refill, hold the filter cartridge
(2) and unscrew it.
2. Refill water or change it as required.
3. Screw the filter cartridge back in by hand.

Checking/changing the water is now complete.
SPECTROCHECK — 07.05.2015
Maintenance
1
2
— 31